AutoDrive route network for the map "Ostenwalde" from AckerDesigner
https://www.farming-simulator.com/mod.php?lang=de&country=de&mod_id=287672&title=fs2022

Version: 1.0.0 from 31.07.2024
- first Version for map version 1.2.0.0

Version: 1.0.1 from 23.08.2024
- Adjustments in the southeast for modified AI traffic

Uploading to other websites is not allowed without my permission!
Original download only on Iwan1803.de, Forbidden-Mods.de or kingmods.net - everything else is stolen...
Please always use the original link out of respect for my work, thank you!

The route network was completely recorded in by me. Only the main roads and some side roads were generated by AD from the splines, but some of them were optimized by me.
Since the AI traffic also drives partly on the side roads (not dirt roads), these are defined as one-way streets. All others have been provided with two-way routes, some with alternative routes. If further routes are required, please add them yourself or let me know.
In addition, the target point for field 71 is outside the field, as there is no suitable departure point (fenced by trees).

It has been tested with various vehicles, but of course it can still happen that it doesn't fit 100% in one place or another.
Please report this to me so that I can correct it or adjust it for yourself.

In some places, the map is designed more for vehicles, trailers etc. up to a maximum of medium size. Therefore, trailers with more than 2 axles should be avoided (especially in the yards).
Otherwise, even large machines can be moved quite easily and should cause no problems.

The following was recorded:
- all roads, field paths and all associated junctions and intersections, including right of way rules
- all farms including loading and unloading points, silos, barns, some parking lots, workshops, etc.
- all fields & meadows incl. catch lines
- for fenced meadows & pastures there is an addition in the target point name
- all productions as well as purchase & sales points
- filling station

Note: the appropriate map and vehicle settings are already stored as standard in the config. You can transfer them to existing ones using the "Restore" button.
Otherwise: activate folder, collision height above ground to 1.25m, collision detection to "FS 19", max. silo distance to 25m, field exit nearest

For your information:
- my 1050, with which I have recorded everything, has almost 95 operating hours
- my test vehicles have an average of approx. 55 operating hours
Test vehicles:
- all start vehicles
- Valtra Q + 2x Rudolph DK 280 (turntable)
- Fendt 724 + 2x Rudolph TDK 301 RP
- Fendt 942 + bale wagon
- Claas Axion 960 + Strautmann Aperion
- Claas Lexion 8900 + 13.7m TerraFlex
- Claas Lexion 8900 + 13.8m cutterbar on Nardi N60-45
- Ropa Tiger 6XL + 4m cutterbar on wagon
- MAN tractor + Lizard MKS 32

Abbreviations for the destination points:
Unl. = delivery, unloading
load = loading

Have fun with this route network!

Iwan1803

➡️ Homepage & weitere Infos: https://www.iwan1803.de
➡️ Twitch: https://www.twitch.tv/iwan1803
➡️ Youtube: https://www.youtube.com/c/Iwan1803