AutoDrive-Routenetword for the Map "Altenthal" from (TWFT) Hahner
https://forbidden-mods.de/filebase/file/53964-altenthal

Version: 1.0.0 from 21.09.2024
- first Version for Mapversion 1.2.0.0
ATTENTION: the map is not designed for AD and therefore some loading and unloading points must be operated manually (mainly at pallet triggers)!

Version: 1.0.1 from 28.09.2024
- added loading stones for Potato Washer and Beetmaster added
- added "& Milk" for target point "Market AT Unl. Paletts"
- turning over grain mill prevented
- bulk goods hall changed

Version: 1.0.2 from 01.10.2024
- for map version 1.3.0.0
- missing unload point for Seedproduction added
- Potato Washer renamed to Earthfruit Washer
- optimized unloading Inn
- small improvements

Uploading to other websites is not allowed without my permission!
Original download only on Iwan1803.de, Forbidden-Mods.de or kingmods.net - everything else is stolen...
Please always use the original link out of respect for my work, thank you!

The route network was completely recorded by me, as the lines generated by AD were too close together. Almost all of the field paths can only be used in one direction, as there is no room for alternative routes.
In some places, the map is designed more for vehicles, trailers etc. up to a maximum of medium size. Therefore, trailers with more than 2 axles and 2 trailers should be avoided.
Otherwise, even large machines can be moved quite easily and should cause virtually no problems.
ATTENTION: the map is not designed for AD and therefore some loading and unloading points must be operated manually (mainly at pallet triggers)!

The following was recorded:
- all roads, field paths and all associated junctions and intersections, including right of way rules
- all farms including unloading and loading points, silos, stables, some parking lots, workshops, etc.
- all fields & meadows incl. catch lines
- all productions as well as purchase & sales points
- all filling stations
- all pastures currently have only one destination point

It has been tested with various vehicles, but of course it can still happen that it does not fit 100% in one place or another.
Please report this to me so that I can correct it or adjust it for yourself.

Note: the appropriate map and vehicle settings are already stored as standard in the config. You can transfer them to existing ones using the "Restore" button.
Otherwise: activate folder, collision height above ground to 1.25m, collision detection to "FS 19", max. silo distance to 25m, field exit nearest

For your information:
- my Fendt 1050, with which I have recorded everything, has more than 60 operating hours
- my test vehicles have an average of approx. 40 operating hours
Testvehicle:
- all starting vehicles and trailers, attachments, etc.
- Massey Ferguson 8S + 2x Welger DK 115 (Turntable)
- Massey Ferguson 8S + 2x Rudolph TDK 301 RP
- New Holland CH7 + cutterbar wagon incl. 7.5 m cutterbar
- New Holland CH7 + 9,1m TerraFlex Draper
- Claas Axion 870 + Carat 140TD
- Valtra Q + ITRunner 26.33HD (HKL)
- Deutz Fahr 7 + Lizard MKS 8
- MAN TGS + Fliegl Timber Runner
- animal trailer Fliegl Noah TTW 140

Abbreviations for the destination points:
Unl. = delivery, unloading
load = loading
AT = Altenthal
MB = Moosberg
MS = Muggenstrum
(m) or (man.) = manual intervention absolutely necessary!

Have fun with this route network!

Iwan1803

➡️ Homepage & weitere Infos: https://www.iwan1803.de
➡️ Twitch: https://www.twitch.tv/iwan1803
➡️ Youtube: https://www.youtube.com/c/Iwan1803
