MAN TGX 2020 V1.8

V1.8.0.0
– Fixed collision (truck no longer gets stuck when driving over bridges)
– Added missing fire
– Rear doors on the Profiliner revised
– Added color configuration for tank
– Added 3 new chassis
– New shop icons
– Load amounts defined for autoloader version 1.8

V1.7.0.0
– Control for warning signs revised
– Reworked control for bumper
– Control for rear doors revised
– Collision revised (no longer gets stuck everywhere)
– Model revised
– Added numerous configurations
– Blind spot sticker fixed (rear door)
– Bullcatcher configuration has been reworked
– Lamp bar configuration has been revised
– Revised tarpaulin from the crown structure
– Added side protection configuration for BDF chassis
– Added tarpaulins for custom skins

V1.6.0.0
– Added license plate configuration
– Added hitch configuration
– Chassis 6×4 Spoiler V1 the rear tires were fixed
– Lift axle can now be adjusted with CTRL+Z
– Lift axle is now rigid when it is up
– Added MAN TGX 2020 with Krone Profiliner body
– Autoload for MAN TGX 2020 with Krone Profiliner body
– Added Simple IC

V1.5.0.0
– Flags have been removed as this will result in the following message: Unpopulating
RenderTextureController as a RenderOverlay is in use by the GUI
– Warning: Duplicate l10n entry has been fixed
– Color URSUS_OLIVE1 replaced as this is no longer supported in the new version
– Saddle plate fixed (can be moved again with the mouse button in V1.3)
– Removed hitch configuration
– Deep hitch can be mounted with button K

V1.4.0.0
– Tarps on swap bodies or trailers can now be opened/closed with the Y key
– Added deep hitch for tandem with deep drawbar or Krone Dolly
– Warning boards can now be opened/closed with the O key
– Bumper can now be flipped with the right mouse button
– Light cones now glow even with low graphics settings
– Added hitch configuration
– Hitch and mud flap configuration is only displayed if a BDF chassis is selected

V1.3.0.0
– Dashboard revised
+ Blinkers are blinking now
+ Speed ​​was replaced by time
+ Revised speed indicator
+ Fuel gauge revised

– vehicle increased (now it is the same size as my other trucks)
– Added new spoilers for swap body chassis
– Air suspension revised for 4×2 chassis (only goes up at the back)
– Added new color palette
– Shop camera revised
– Indicators and daytime running lights revised
– Added blinker configuration (static and dynamic)
– Added logo configuration
– AttacherJoints schema revised
– Removed 3 warnings (Warning: Shape from ‘MAN_TGX_2020.i3d.shapes’ too big (XXX KB). Maximum supported size on Consoles is 8192 KB.)
– Mod size reduced (from 82.6 MB to 66,7 MB)
– Installed hydraulic connections
– Added 4 new mudflaps
– Fifth wheel fixed (with certain Poppy configurations, when adjusting the fifth wheel, coupled trailers were not pulled along)
– Added headlight bar + side guard configuration (thanks to [HRFF] Äffchen for the lowbar)
– Added bull catcher configuration
– Added lift axle for steering axle (adjustable with left mouse button)
– Added Angles Morts configuration

V1.2.0.0
New:
– Motor configurations
– Interior lighting configuration

Fix:
– Fixed lamp bracket 5 to 6 (lamps)
– Fixed bug with License plate BDF 1 axis
– Hoses have been fixed (now connect to trailer and semitrailer)
– When reversing, there is now an acoustic tone

v1.0.0.1:
– Official, release version;
– Various fixes and improvements.