30′ (9.5 meter) Flatbed Trailer With Tipper and Logging Options
-The trailer frame, rims, tipper body, log forks, cover, liquid tank, and liquid tank trim are all color selectable.
-The trailer has 6 different body configurations:
-Standard flatbed bale/transport trailer (cost $15,000).
-Tipper body without cover (additional cost $15,000).
-Add cover to tipper body (additional cost $1000).
-Log forks (additional cost $1,500).
-Liquid tank (additional cost $10,000).
-Slurry/Digestate Spreader with 24 meter width (additional cost $2,500).
-Can be configured as a flat hitch or a gooseneck trailer hitch.(cost $1,500).
-The gooseneck coupler and pintle hitch height can be adjusted for different vehicle heights.
-A rear trailer hitch is also an option. (cost $100). *Rear trailer hitch is not available with the Slurry Spreader configuration*
-The standard Lizard tires and rims are custom made.
-The trailer is equipped with ramps for loading and transporting small machinery.
-Can choose standard with ramps or to remove the ramps for a credit of $250.
-Custom painted dirt and wear textures.
-There are 2 different tipper capacity configurations, standard (34,650 liters) and with body extention (41,400 liters – cost $2000)
-Can choose between standard tip height, or a lower tip height for tipping inside buildings or structures with low roofs.
-Can be configured with a wooden deck (cost $500) or steel deck which is standard.
-Added many different colors to choose from in addition to the standard ones.
-Rear work lights.
-Flatbed trailer can be configured to autoload round bales, square bales, and pallets (FS22_aPalletAutoLoader mod is REQUIRED for pallet autoloading to work).
-There are 5 different trailers in this pack.
-Bale capacities for the trailers in this pack are:
150 Small Square Bales (1.2 meter Conventional Bales)
24 1.8 meter Square Bales
24 2.2 meter Square Bales
24 2.4 meter Square Bales
18 1.25 meter Round Bales
18 1.5 meter Round Bales
18 1.8 meter Round Bales
4 Round Cotton Bales
2 Square Cotton Bales
– The Pallet Autoload Specialization mod by Achimobil (FS22_aPalletAutoLoader) is REQUIRED for pallet autoloading to work.
-To use autoload, key “B” starts and stops loading.
Then key “Y” is for unloading bales using the left mouse button to place them where desired or to unload them directly to the bed for manual unloading.
After unloading, key “Y” must be pressed again to “reset” the autoloading process for the next load.
Changelog 2.0.0.2
– Added support to autoload all 1x – 9x bales from the FS22_selectableBaleCapacity mod.
Changelog 2.0.0.1:
– Fixed an issue that the bale autoload would not unload bales correctly with gamepads.
– Added dedicated keyboard and gamepad controls for bale unloading.
– Changed gamepad keyboard settings for raising and lowering the gooseneck hitch and pin hitch because they conflicted with other controls.
– Cleaned up and reworded the description to remove un-necessary and redundant descriptions.
Changelog 2.0.0.0:
– Removed the need for multiple trailers to autoload bales.
– Now the same trailer will load all bales in-game including all of the bales with FS22_selectableBaleCapacity mod.
– Updated the bale autoload capacities.
– Added ability to autoload Hesston bales.
– Adjusted the un-realistic fill capacity discharge rates for dump trailer and tank trailer configurations.
– Re-configured color configurations to only show when needed.
– Fixed color configurations not showing the correct prices.
New bale capacities are: (without using FS22_UniversalAutoload mod)
– 200 Small Square Bales (1.2 meter Conventional Bales)
– 32 1.8 meter Square Bales
– 26 2.2 meter Square Bales
– 24 2.4 meter Square Bales
– 16 2.4 meter Square Hesston Bales
– 30 1.25 meter Round Bales
– 22 1.5 meter Round Bales
– 18 1.8 meter Round Bales
– 7 Round Cotton Bales
– 2 Square Cotton Bales
Changelog 1.1.0.4:
– Removed dependency on the FS22_aPalletAutoloader mod’s scripts which can now make this mod for all platforms.
Changelog 1.1.0.3:
– Fixed issue that none of the lights worked when activated.
– Fixed issue that lime and slurry had no spreading effects.
– Added support for the FS22_UniversalAutoload mod.
NOTE* The FS22_UniversalAutoload mod is not required for bale autoloading to work however for pallets to autoload you will need the FS22_UniversalAutoload mod installed as well.
To use autoload feature with the FS22_UniversalAutoload mod, the trailer’s configuration needs to be set to the standard “Flat Bed” configuration (first body configuration choice).
It is also recommended to configure the trailer without ramps when using autoload.
– Removed dependency on the FS22_aPalletAutoloader mod.
– Removed the autoload pallets configuration since it’s no longer needed when using the FS22_UniversalAutoload mod. (saved configurations may change on existing save-games)
– Added real lights to the strobe lights so they will reflect off the surroundings.
– Added gamepad button controls to adjust the dividing floor for the livestock trailer configuration along with the gooseneck and pintle hitch heights.
Changelog 1.0.0.2
– Added support for FS22_SelectableBaleCapacity mod’s 2x, 3x, and 4x bales.
– Added rear strobe lights. Uses standard beacon light key to activate.
Changelog 1.0.0.1:
– Fixed issue that tank collisions and triggers were present with other configurations.
– Fixed issue that Pallet and Bale Autoloading triggers were still present when not configured with autoload.
Credits:
macktrucker921
Download mod
| File | File size |
|---|---|
FS22_flatBedTrailerCombo_AutoPack_crossplay
|
30 MB |
Good mod